Lexmark T64x Manual Do Utilizador
5
Remove the stack of print media.
6
Close the finisher output bin cover.
7
Press .
Clearing staple jams
1
Lift the front edge of the finisher output bin
cover until it locks into position.
cover until it locks into position.
2
Remove the print media.
3
Press the latch to open the stapler access door.
4
Firmly pull the colored tab to remove the staple
cartridge holder from the stapler.
cartridge holder from the stapler.
5
Use the metal tab to lift the staple guard, and
then pull out the sheet of staples.
then pull out the sheet of staples.
Discard the entire sheet.
6
Remove any loose staples from the staple
guard.
guard.
7
Look through the clear covering on the bottom
of the cartridge holder to make sure no staples
are jammed in the entry throat.
of the cartridge holder to make sure no staples
are jammed in the entry throat.
8
Press down on the staple guard until it snaps
securely into place.
securely into place.
9
Push the cartridge holder firmly into the stapler
until the cartridge holder clicks into place.
until the cartridge holder clicks into place.
10
Close the stapler access door.
11
Close the finisher output bin cover.