Lexmark Se 3455 Manual Do Utilizador
106
6.4 Changing the Coax Timeout Value (For
Reference Only)
Reference Only)
If necessary you can change the Coax Timeout value by following these steps:
1.
Press Menu> until NETWORK MENU displays. Press Select.
2.
Press Menu> until NETWORK OPTION 1, NETWORK OPTION 2 or
NETWORK OPTION 3 displays. The number corresponds to the number
of the option connector the SCS Adapter occupies. Press Select.
NETWORK OPTION 3 displays. The number corresponds to the number
of the option connector the SCS Adapter occupies. Press Select.
3.
Press Menu> until you see SCS MENU 1, SCS MENU 2 or SCS MENU
3. Press Select.
3. Press Select.
4.
Press Menu> until you see SCS OPTIONS. Press Select.
5.
Press Menu> until you see MISC. SETTINGS. Press Select.
6.
Press Menu> until you see Coax Timeout. Press Select. Enter a value from
0 to 255. Press Select. The default is 0 seconds (disabled). You can specify
how long the adapter will wait before closing the connection to the host.
how long the adapter will wait before closing the connection to the host.