Lexmark Se 3455 Manual Do Utilizador

67

From the printer operator panel, do the following:

Press Menu> until the NETWORK MENU displays. Press Select.

Press Menu> until the NETWORK OPTION 1 displays. Press Select.
(This example assumes the MarkNet S Adapter is installed in option
connector 1.)

Press Menu> until you see NETWORK 1 SETUP. Press Select.

Press Menu> until you see TCP/IP. Press Select.

Here you find the following settings:

Yes

Yes 

or No

(Yes, if you use a BOOTP server.)
(No, if you set the IP address another way.)

Yes 

or No

(Yes, if you use a DHCP server.)
(No, if you set the IP address another way.)

Yes 

or No

(Yes, if you use a RARP server.)
(No, if you set the IP address another way.)

157.184.67.102

(Address available from your network administrator)

255.255.255.0

(Appropriate netmask for your network)

157.184.67.1 

(IP address of the IP gateway)

Name 

(Necessary when using DHCP server.)