Lexmark 910 Series Folheto

Lift the paper 
support and extend 
the paper exit tray.

Load the paper.

Lower the paper feed guard, 
squeeze the paper guide, and slide 
it to the left edge of the paper.

Press 

 to print 

an alignment page.

You may discard the 
alignment page after it 
prints.

Open the 
access cover.

Remove the sticker and tape from 
the bottom of the print cartridges.

Open the cartridge lids, insert the cartridges, 
and snap the cartridge lids closed.

Warning: Do not touch the copper 
contact area on the back or the metal 
print cartridge nozzles on the bottom.

If you are using your 
printer with a 
computer, continue 
with “Install the 
software”...

 Save the print 

cartridge storage unit to 
protect new or partially used 
cartridges.

Remove the photo 
cartridge from the 
print cartridge storage 
unit.

• Use only the power supply provided with this product or the manufacturer's authorized 

replacement power supply.

• Connect the power supply cord to an electrical outlet that is near the product and easily 

accessible.

• Refer service or repairs, other than those described in the user documentation, to a professional 

service person.

CAUTION: Do not set up this product or make any electrical or cabling connections, such as the 
power supply or telephone, during a lightning storm.

Note: Contents may vary.

*11X1111*

?

?

?

?

?

?

http://support.lexmark.com/

Connect the power 
cord.

Make sure the Power 
light is on.

Press + to scroll to 
your language, and 

then press 

.

Close the 
access cover.