Lexmark 912 Manual Do Utilizador
Maintenance
12
Press
Go
to reset the transfer belt counter.
Once the counter is reset, the
message appears and a test
page prints. After the test page has printed, you are prompted to enter alignment values for
each setting.
each setting.
13
Press Menu to choose the alignment value.
14
Press Select to enter the value and continue to the next value.
After you have entered values for each alignment setting, the transfer belt should be aligned
and the printer ready to print.
and the printer ready to print.
Note: If you replaced the transfer belt after receiving the
message or the
message, see
for instructions on replacing the fuser.
For instructions about replacing other supply items, click one of the following headings:
Replacing a toner cartridge
Your printer monitors the toner level of your toner cartridges. When the toner is getting low, the
printer displays
printer displays
. This message indicates it is time for you to replace one or
more specified toner cartridges. Press
Go
to clear the attendance message.
The
Supplies
status message appears on the second line of the display to remind you there are
supplies that need attention. You can open the
Supplies Menu
to see which toner cartridge is low.
The printer continues to display the
Supplies
message until you replace the toner cartridge or until it
is empty.
When the life of the toner cartridge has expired, the printer displays
88 <color> Toner Empty
. You
must replace the toner cartridge to continue printing.
Use the following steps or the instruction sheet supplied with the toner cartridge to replace it.
Replacing a toner cartridge
165