Lexmark E360d Series Manual Do Utilizador
Installing hardware options
Installing a 250- or 550-sheet drawer
The printer supports one optional drawer; you can install a 250- or 550-sheet drawer.
CAUTION—SHOCK HAZARD: If you are installing an optional drawer after setting up the printer, then turn the
printer off and unplug the power cord from the wall outlet before continuing
printer off and unplug the power cord from the wall outlet before continuing
1
Unpack the drawer, and then remove any packing material from the outside of the drawer.
2
Remove the tray from the support unit.
1
Support unit
2
Tray
3
Remove any packing material and tape from inside the tray.
4
Insert the tray into the support unit.
5
Place the drawer in the location chosen for the printer.
Additional printer setup
21