Lexmark 522 Manual Do Utilizador
17
Step 3: Load print material
Complete these instructions to load print material
into any of the standard or optional trays. All paper
trays are loaded in the same way.
into any of the standard or optional trays. All paper
trays are loaded in the same way.
1
Remove the paper tray.
2
Pull the width guide tab and slide the width
guide to the far right side of the tray.
guide to the far right side of the tray.
3
Squeeze the length guide lever and slide the
length guide to the correct position for the
size paper you are loading.
length guide to the correct position for the
size paper you are loading.
.
4
Place the paper into the paper tray with the
recommended print side face down for
single-sided printing and face up for duplex
printing. Do not fill paper above the paper
capacity mark (fill line).
recommended print side face down for
single-sided printing and face up for duplex
printing. Do not fill paper above the paper
capacity mark (fill line).
5
Pull the width guide tab and slide the width
guide
guide
to the left until it lightly rests against
the edge of the paper stack.
6
Reinstall the tray.
Width guide
Width guide
tab
tab
Paper size indicators
Length guide
Length guide
lever
lever
Width guide
Width
guide tab
guide tab
Paper capacity
mark
mark