Lexmark 2480 Manual Do Utilizador
102
Using Setup mode
Control menu options
Control options
Use these menu
options
options
When you want to…
Uni-Dir Printing
Customize the direction of print.
• Set to On and in NLQ mode, the printer prints
unidirectionally by line.
• Set to Off, the two passes are printed bidirectionally except
Proportional Spacing, which is still printed unidirectionally.
• The factory setting is Off.
Auto Ready Cut Sheet
Customize how the printer goes to Ready after a cut sheet is
loaded.
loaded.
• When set to On, the printer automatically goes to the
Ready state after a cut sheet is loaded into the printer.
• When set to Off, the printer remains offline after a cut
sheet is loaded. Press Start/Stop to put the printer in the
Ready state.
Ready state.
Paper Out Alarm
Set the printer to alarm or not.
• When set to Enable, the alarm sounds when the printer runs
out of paper. The factory setting is Enable.
• When set to Disable, the alarm does not sound.
Demo Print
Enable or Disable the printers ability to print the Demo page.
Menu Language
Select the language you want your menus to print in. The
menus can appear in one of the following languages: English,
French, German, Italian, Spanish and Brazilian Portuguese.
menus can appear in one of the following languages: English,
French, German, Italian, Spanish and Brazilian Portuguese.
TOF Read
Have the printer verify the Top-Of-Form before it begins
printing continuous forms.
printing continuous forms.
Quiet
Change the noise level of your printer by putting it in Quiet
mode. The printer prints slower in Quiet mode.
mode. The printer prints slower in Quiet mode.