Lexmark 2480 Manual Do Utilizador
142
Tr
oubleshooting
Maintenance
This section describes how to remove the ribbon
cartridge and clean the printer.
cartridge and clean the printer.
Removing the ribbon cartridge
1
Turn the printer Off.
2
Remove the ribbon access cover.
3
Set the forms thickness lever to position 7.
4
Squeeze the left and right latches on the ribbon
cartridge and lift.
cartridge and lift.
The cartridge unlatches from the printer carrier.
Cleaning the printer
Before you clean the printer:
1
Turn the printer Off.
2
Unplug the power cord.
3
Wait until the printhead is cool.
4
Remove the ribbon cartridge.
Cleaning the inside of the printer:
Every few months, use a soft brush and a vacuum to
remove dust, ribbon lint, and pieces of paper. Vacuum
any dust from around the printhead and in the printer
cavity.
Every few months, use a soft brush and a vacuum to
remove dust, ribbon lint, and pieces of paper. Vacuum
any dust from around the printhead and in the printer
cavity.
Cleaning the cover:
Clean the outside of the printer with a damp cloth and
mild soap. Do not use any spray-type or chemical
cleaners anywhere on your printer. Do not put any
liquids or spray near the air vents. For stubborn ink
stains on the cover, use a commercial mechanic's hand
cleaner.
Clean the outside of the printer with a damp cloth and
mild soap. Do not use any spray-type or chemical
cleaners anywhere on your printer. Do not put any
liquids or spray near the air vents. For stubborn ink
stains on the cover, use a commercial mechanic's hand
cleaner.