Lexmark 2480 Manual Do Utilizador
29
Operator panel
Advancing the paper
You can use the operator panel to advance the paper
when the printer is not printing.
when the printer is not printing.
•
Press LineFeed to advance the paper to the
next line.
next line.
•
Press FormFeed to advance the paper to
the Top-Of-Form on the next page or to
eject the cut form.
the Top-Of-Form on the next page or to
eject the cut form.
If you are at the Tear Off bar:
•
Press LineFeed to move the paper
incrementally.
incrementally.
•
Press Tear Off to move the paper to the
Top-Of-Form.
Top-Of-Form.
Using Tear Off
Tear Off works only when the tractor unit is in the push
position.
position.
Note: For the Tear Off function to work
properly, you must set the correct page
length in the Setup menu or your
application software.
length in the Setup menu or your
application software.
The Tear Off function advances the perforation of a
continuous form to the tear bar position. You can set
Tear Off to move a continuous form automatically to
the Tear Off position (Auto Tear Off set to On or to One
Second), or you can move a continuous form manually
to the Tear Off position (Auto Tear Off set to Off). For
more information, see “Setting the Tear Off position”
on page 87.
continuous form to the tear bar position. You can set
Tear Off to move a continuous form automatically to
the Tear Off position (Auto Tear Off set to On or to One
Second), or you can move a continuous form manually
to the Tear Off position (Auto Tear Off set to Off). For
more information, see “Setting the Tear Off position”
on page 87.