Lexmark 2480 Manual Do Utilizador

Top-Of-Form sets the first line of print. Use the operator 
panel to save your Top-of-Form settings for continuous 
forms, a cut form, and for each macro enabled.

Top-Of-Form can range from minus 1 inch to plus 
14 inches from the top of continuous form paper. 

Note: Use this method to also set Top-Of-Form 

for continuous forms loaded in the 
optional Tractor 2 Feeder.

To set and save Top-Of-Form:

Clear the paper path. 

The Paper Out light blinks if no paper is loaded. 
If the Paper Out light is Off, tear off excess 
forms and press Load/Unload. 

If an individual form is loaded, press FormFeed 
to clear paper path. 

Make sure the paper select lever is in the 
continuous forms

 position.

Load continuous form paper on the push 
tractor feed pins (or Tractor 2 feed pins if you 
are using the optional Tractor 2 Feeder).

For help loading paper, see “Loading 
continuous forms using the push tractor” on 
page 48. 

Remove the ribbon access cover. 

Press Load/Unload. 

The paper moves to the current Top-Of-Form. 
The Paper Out light goes Off.