Lexmark 248X Manual Do Utilizador
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
Section 7: Downloading Characters and Fonts
130
Printing the Character
To print the ampersand symbol, send the following command sequence:
Designing Monospaced Draft Characters
When designing monospaced draft characters, design the character for 10 cpi
output and use as many dot-columns as possible. This method also creates a
better designed 12 cpi draft character.
output and use as many dot-columns as possible. This method also creates a
better designed 12 cpi draft character.
To design a draft character, start with a grid that is 9 dots wide by 24 dots high.
Although the character matrix for a draft character is 10 dots wide, the last
column must be blank.
Although the character matrix for a draft character is 10 dots wide, the last
column must be blank.
<x
1B49
-
ESC,I - select print mode
04
-
draft, 10 cpi
1B5B64 -
ESC,[,@ - select print quality
0100
-
byte count (low byte first) - x0001, 1
01
-
print quality = Fast Draft
1B5E
-
print one character command
26
-
print character x26, ASCII 38 - ampersand
>