Nokia 110S Manual Do Utilizador
GB 7
Connecting the Mediamaster & First-time Installation
Conax smart card
The Mediamaster is equipped with a built-in decoder for the
Conax encryption system.
Conax encryption system.
Insert a Conax smart card fully into the slot on the back of the
Mediamaster. The gold chip must face downwards and inwards.
Mediamaster. The gold chip must face downwards and inwards.
Connecting a Hi-fi system
It is possible to connect a TOS link cable from the Digital audio
output on the Mediamaster to a Hi-fi system that is equipped
with the corresponding audio input.
output on the Mediamaster to a Hi-fi system that is equipped
with the corresponding audio input.
• Also use the TOS link Digital audio output for connection
to an external Dolby digital/DTS decoder.
First-time installation general information
Once you have correctly connected the Mediamaster, you will also
have to perform a "First-time installation." During this procedure,
helpful information is displayed at the bottom of the menus.
have to perform a "First-time installation." During this procedure,
helpful information is displayed at the bottom of the menus.
The ok button always confirms a selection within these menus,
and pressing it will take you to the next step in the installation
process. However, sometimes more than one value has to be
entered in a menu. Make all the necessary changes first.
Then, confirm them all simultaneously by pressing ok.
and pressing it will take you to the next step in the installation
process. However, sometimes more than one value has to be
entered in a menu. Make all the necessary changes first.
Then, confirm them all simultaneously by pressing ok.
• You can always go back to the previous menu by pressing back.
• Use the cursor up/down buttons
to move upwards
and downwards from one line to another.
• Use the cursor left/right buttons
to change settings.
• Use the number buttons on the remote control to enter numeric
values.