Manualsbrain.com
  1. Manuais
  2. Marcas
  3. TP-LINK
  4. 24+2/24+2G
  5. Manual Do Utilizador

TP-LINK 24+2/24+2G Manual Do Utilizador

Download
Página de 37
TL-SF2226P+/TL-SL2226P+ 
 Remote Smart Switch User Guide 
 
The color of the port on the panel is yellow, which means that the port is in connection. If 
it is red, it means that the port is forbidden to use. If the color of the port frame is red, it’s 
said that the port is management port. 
5.2.3 Configuration 
If the device is well connected, you can configure the switch now. 
5.2.3.1 Conventional Management 
1.  Disconnect   
When the device is in connection, if at the moment it does not need management, you 
can choose the Close Group button to close the group. 
2. Reset 
When the device is in connection, if resetting needed, click main menu ->Device->Reset, 
a dialog will pop up. Click ok on the dialog, finally, the switch will be reset. 
3.  Resume Factory Setting 
When the device is in connection, if resuming factory setting needed, click main menu 
->Device->Resume Factory Setting, a dialog will come out, click ok on the dialog, then 
the switch will resume factory setting. 
4. Change 
Password 
When the device is in connection, if you want to change password, click main 
menu->Device->Change Password, a dialog will be pop up, you can change password 
in the dialog, the length of password is not more than 7. 
5.2.3.2 Configuration of Device 
1. VLAN 
Config 
The TL-SF2226P+ can support three VLAN modes, no VLAN, port VLAN and tag VLAN. 
Default Setting:
  no VLAN. 
Steps of Setting:
  If VLAN mode is no VLAN, or you want to change current VLAN  
mode, you should select one mode you want to. Click main menu->config->Switch 
VLAN Mode
. As figure 5-11. 
 
 
- 14 -