Cisco Systems 3130 Manual Do Utilizador

Aggregate address

Disabled: None defined.

AS path access list

None defined.

Auto summary

Enabled.

Best path

The router considers as-path in choosing a route and does not compare similar 
routes from external BGP peers.

Compare router ID: Disabled.

BGP community list 

Number: None defined. When you permit a value for the community number, the 
list defaults to an implicit deny for everything else that has not been permitted.

Format: Cisco default format (32-bit number).

BGP confederation identifier/peers

Identifier: None configured.

Peers: None identified.

BGP Fast external fallover

Enabled.

BGP local preference

100. The range is 0 to 4294967295 with the higher value preferred.

BGP network

None specified; no backdoor route advertised.

BGP route dampening

Disabled by default. When enabled:

Half-life is 15 minutes.

Re-use is 750 (10-second increments).

Suppress is 2000 (10-second increments).

Max-suppress-time is 4 times half-life; 60 minutes.

BGP router ID

The IP address of a loopback interface if one is configured or the highest IP address 
configured for a physical interface on the router. 

Default information originate 
(protocol or network redistribution) 

Disabled.

Default metric

Built-in, automatic metric translations.

Distance 

External route administrative distance: 20 (acceptable values are from 1 to 255).

Internal route administrative distance: 200 (acceptable values are from 1 to 255).

Local route administrative distance: 200 (acceptable values are from 1 to 255).

Distribute list 

In (filter networks received in updates): Disabled.

Out (suppress networks from being advertised in updates): Disabled.

Internal route redistribution

Disabled.

IP prefix list

None defined.

Multi exit discriminator (MED) 

Always compare: Disabled. Does not compare MEDs for paths from neighbors in 
different autonomous systems. 

Best path compare: Disabled.

MED missing as worst path: Disabled.

Deterministic MED comparison is disabled.