Raritan Computer DKX2-v2.6.0-0R-E Manual Do Utilizador
Chapter 8: Device Management
146
3. Enter the SSH Port information. The standard SSH TCP port number
is 22 but the port number can be changed to provide a higher level of
security operations.
security operations.
4. Click OK.
HTTP and HTTPS Port Settings
You are able to configure HTTP and/or HTTPS ports used by the KX II.
For example, if you are using the default HTTP port 80 for another
purpose, changing the port will ensure the device does not attempt to
use it.
For example, if you are using the default HTTP port 80 for another
purpose, changing the port will ensure the device does not attempt to
use it.
To change the HTTP and/or HTTPS port settings:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Enter the new ports in the HTTP Port and/or HTTPS Port fields.
3. Click OK.
Entering the Discovery Port
The KX II discovery occurs over a single, configurable TCP Port. The
default is Port 5000, but you can configure it to use any TCP port except
80 and 443. To access the KX II from beyond a firewall, your firewall
settings must enable two-way communication through the default Port
5000 or a non-default port configured here.
default is Port 5000, but you can configure it to use any TCP port except
80 and 443. To access the KX II from beyond a firewall, your firewall
settings must enable two-way communication through the default Port
5000 or a non-default port configured here.
To enable the discovery port:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Enter the Discovery Port.
3. Click OK.