Raritan Computer DKX2-v2.6.0-0R-E Manual Do Utilizador

 

Overview .................................................................................................. 10 
Rack Mounting ......................................................................................... 10 
Default Login Information ........................................................................ 12 
Getting Started ........................................................................................ 12 
Logging in to the KX II ............................................................................. 25 
Allow Pop-Ups ......................................................................................... 26 
Security Warnings and Validation Messages .......................................... 26 
Installing a Certificate .............................................................................. 27 

 

 

This section provides a brief overview of the installation process. Each 
step is further detailed in the remaining sections of this chapter. 

Before installing the KX II, configure the target server you want to access 
via the KX II so you ensure optimum performance.   

 

The KX II can be mounted in 1U (1.75", 4.4 cm) of vertical space in a 
standard 19" equipment rack.     

 

The steps correspond to the numbers shown in the front rackmount 
diagrams. 

1.  Secure the cable-support bar to the back end of the side brackets 

using two of the included screws. 

2.  Slide the KX II between the side brackets, with its rear panel facing 

the cable-

support bar, until its front panel is flush with the “ears” of 

the side brackets. 

3.  Secure the KX II to the side brackets using the remaining included 

screws (three on each side). 

4.  Mount the entire assembly in your rack, and secure the side 

brackets' ears to the rack's front rails with your own screws, bolts, 
cage nuts, and so on.