Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador
Códigos do produto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
64
3.11.2 Network Printer
The Thin Client uses the standardized Line Printer Daemon Protocol (BSD spool) as defined
in RFC 1179 to communicate with network printers.
in RFC 1179 to communicate with network printers.
Figure 40: Printer definition dialog box (settings for network printer shown)
To set up a network printer
From the Setup tab, click the Printer subtab.
1. Click
New
.
2. Enter the name of the printer in the Printer settings dialog box.
3. From
3. From
the
Connection type
drop-down list, select Network.
4. From
the
Filter
drop-down list, select None to disable filtering. Select Text to print
from a local shell (print shell command: lpr -P<printer name>). Select PCL2 for the
PCL2 protocol (not supported by all hardware platforms).
PCL2 protocol (not supported by all hardware platforms).
5. Enter the IP address or name of the remote system or printer box in the Printer
address
field.
• If your network does not have a DNS server, alternatively you can use the name
of the printer if it has been defined in the local hosts file on the Thin Client (Setup
> Network > Advanced) See Ch. 3.2 Network.
> Network > Advanced) See Ch. 3.2 Network.
6. Enter the name of the printer queue of the remote system or printer box in the Printer
queue
field.
7. Citrix MetaFrame ICA servers can automatically create a printer definition
(“autocreated printer”) using parameters you entered on the Thin Client. These
parameters are transferred to the MetaFrame server when you connect via ICA. Enter
the following:
Driver name
parameters are transferred to the MetaFrame server when you connect via ICA. Enter
the following:
Driver name
: Enter the driver for your printer. Note: The printer driver name must be
exactly the same as the driver installed on the MetaFrame server. See the installed
printer driver list on the MetaFrame server if you are unsure. The MetaFrame server
will not autocreate a printer if the printer driver you entered here is not installed on the
MetaFrame server (check capitalization and spelling!).
Default
printer driver list on the MetaFrame server if you are unsure. The MetaFrame server
will not autocreate a printer if the printer driver you entered here is not installed on the
MetaFrame server (check capitalization and spelling!).
Default
: Sets the printer to your default printer on the MetaFrame server.
8. Click
OK
in the Printer definition dialog box and Apply in the Printer subtab.
Name of printer queue of the
remote system or printer box
remote system or printer box
IP address or name of the
remote system or printer box
remote system or printer box