Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador
Códigos do produto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
68
3.
Activate the printer:
xpchange -dev my_elux_printer
xpchange -dev my_elux_printer
4.
Test the printer:
xpadd -de my_elux_printer dr /etc/hosts
xpadd -de my_elux_printer dr /etc/hosts
3.11.6 ThinPrint
ThinPrint
®
software from the ThinPrint GmbH in Germany allows optimized printing in network
across various platforms. Components include the ThinPrint server and ThinPrint client. The
server component processes print data for the target printer and sends it in compressed form
to the client. The client receives print jobs from the server, decompresses them and sends
them to the selected printer. ThinPrint Server and Client are connected via TCP/IP. ThinPrint
is a print protocol. Unlike TCP direct, LPR or CUPS, with ThinPrint the bandwidth can be
specified, meaning it is a viable option for networks with small bandwidth.
To use this software, on the Thin Client you must install the ThinPrint client software, attach a
local printer and configure the ThinPrint Client and ThinPrint Server.
server component processes print data for the target printer and sends it in compressed form
to the client. The client receives print jobs from the server, decompresses them and sends
them to the selected printer. ThinPrint Server and Client are connected via TCP/IP. ThinPrint
is a print protocol. Unlike TCP direct, LPR or CUPS, with ThinPrint the bandwidth can be
specified, meaning it is a viable option for networks with small bandwidth.
To use this software, on the Thin Client you must install the ThinPrint client software, attach a
local printer and configure the ThinPrint Client and ThinPrint Server.
To configure the ThinPrint client as a local application using a user-defined
command
1. Install the software “Thin Print client” (“thinprint”) on the Thin Client.
2. Connect a printer to the Thin Client.
3. On the Thin Client, go to Configuration > New > Local.
2. Connect a printer to the Thin Client.
3. On the Thin Client, go to Configuration > New > Local.
• Name: Enter an appropriate name, such as “ThinPrint”.
• Application: Select Custom.
• Parameter: Enter the command “thnuclnt” and required parameters. The individual
• Application: Select Custom.
• Parameter: Enter the command “thnuclnt” and required parameters. The individual
parameters are described the section “Parameters” below.
Example: thnuclnt -dev /dev/lp0 -class HP -name “HP LaserJet 6L”
Example: thnuclnt -dev /dev/lp0 -class HP -name “HP LaserJet 6L”
4. Select
Start automatically
to start the software at device start.
5. (optional)
Select
Hidden
to hide the application from the user. (recommended)
6. Click Apply and Finish.
Parameters
Format: thnuclnt -dev <device> -class <classname> -name <printer name>
<device>
Enter the device name. Use one of the following formats:
Parallel printer
Enter /dev/lp0.
USB printer
Enter /dev/usb/lp0.
Network printer
Enter the printer definition name as defined in the eLux
NG starter (see “3.11.2 Network Printer”).
Serial printers are not supported.
<classname>
(optional) Class name. Maximum length of seven characters. Do not
include blanks.
include blanks.
<printer name>
Name for this printer. UNIX conventions generally apply.
For more than one printer, repeat the parameters in the order above.
Example for a parallel and USB printer:
Example for a parallel and USB printer:
thnuclnt -dev /dev/lp0 -class HP -name “HP LaserJet 6L” -dev
/dev/usb/lp0 -class HP -name “HP LaserJet 4L”
/dev/usb/lp0 -class HP -name “HP LaserJet 4L”