Fujitsu eLux NG S26361-F2600-L134 Manual Do Utilizador
Códigos do produto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
72
3.13 Network
Hardware
Software Requirements
ISDN, ADSL, modem: “ISDN Modem ADSL support” (file name: “isdn”) FPM in base OS EPM.
Required software for wireless LAN is discussed in the wireless LAN chapter.
For a description of EPMs and FPMs, see the ELIAS NG Administrator’s Guide.
Required software for wireless LAN is discussed in the wireless LAN chapter.
For a description of EPMs and FPMs, see the ELIAS NG Administrator’s Guide.
To modify network hardware settings
1. From
the
Setup
tab, click the Hardware subtab.
2. Click your network type from the Network type drop-down list: Ethernet, ISDN, ADSL,
Modem, Token ring
. Fill in the related fields.
3. Click Apply.
A detailed description of each network setting follows. For a list of supported cards, see “Appendix 6:
Supported Hardware.”
Supported Hardware.”
3.13.1 Ethernet
Depending on your hardware platform you can connect to a local-area network using the onboard
Ethernet card, a network interface card, or an adapter card for fiber optic.
Ethernet card, a network interface card, or an adapter card for fiber optic.
To set network hardware settings for Ethernet
1. From
the
Setup
tab, click the Hardware subtab.
2. Click
Ethernet
from the Network type list.
3. Select the Ethernet speed from the Speed list. If Auto does not work, see your
network administrator for the correct speed.
• 1 Gbit Only available for the gigabit Ethernet network card Broadcom Tigon 3
(BCM570x). Other card parameters will be automatically configured.
• AUI, BNC: Only available for the 3Com® EtherLink® 10 PCI Combo Network
Interface Card.
4. Click Apply.