Enterasys Networks 2200 Manual Do Utilizador

To install the 2H258-17R in a 19-inch rack, Enterasys Networks includes a strain-relief bracket for 
cable management and an accessory kit containing the rackmount brackets, and mounting screws 
to attach the rackmount brackets and strain-relief bracket.

The installation site must be within reach of the network cabling and meet the requirements listed 
below:

•

An appropriate grounded power receptacle must be located within seven feet of the location.

•

Maintain a temperature of between 5

°C (41°F) and 40°C (104°F) at the installation site with 

fluctuations of less than 10

°C (18°F) per hour.

CAUTION: To ensure proper ventilation and prevent overheating, leave a minimum 
clearance space of 5.1 cm (2.0 in) at the left, right, and rear of the 2H258-17R.

WARNING: Before installing the 2H258-17R into a rack, ensure that the rack supports 
the device(s) without compromising the stability of the rack. Otherwise, personal injury 
and/or equipment damage may result.

3068-02

A = 15 cm (6 in)

B = 57 cm (22.5 in)

C = 53 cm (21 in)

C

B

A

D

D = 213 cm (7 ft)