Lathem LTD Manual Do Utilizador
8 - LT Series Operations Manual
ADJUSTING PRINT IMPACT
Print impact may be set to any desired level,
from very hard to very light. The impact
adjuster is located on the bottom of the unit.
Using a small flat head screwdriver, turn the
adjuster to the right to increase or left to
decrease the impact. (Figure 4)
from very hard to very light. The impact
adjuster is located on the bottom of the unit.
Using a small flat head screwdriver, turn the
adjuster to the right to increase or left to
decrease the impact. (Figure 4)
(Note: To extend the effective life-span of
the unit, use the lightest adjustment possible,
which still gives a legible imprint.)
the unit, use the lightest adjustment possible,
which still gives a legible imprint.)
REPEAT/ADVANCE OPERATION
The Repeat/Advance switch (Figure 5), located on the back of the machine,
allows you to control the numbering feature of the unit. The Repeat/Advance
switch provides the option of numbering items consecutively, or with the same
number. To utilize these options:
allows you to control the numbering feature of the unit. The Repeat/Advance
switch provides the option of numbering items consecutively, or with the same
number. To utilize these options:
•
To REPEAT an imprint with the same
number, flip the switch to the UP position.
number, flip the switch to the UP position.
•
To ADVANCE the numbering wheels, press
and hold the switch and press the Manual
Registration Button to advance one number
at a time. Continue pressing until the
desired number is reached.
and hold the switch and press the Manual
Registration Button to advance one number
at a time. Continue pressing until the
desired number is reached.
•
Return the switch to the CENTER position
for normal operations.
for normal operations.
Figure 4
Figure 5