VBrick Systems ETV v3.1 Manual Do Utilizador

Configuring for SSL

ETV Portal Server Administrator Guide

63

5. Click 

 to launch the Web Server Certificate Wizard

6. Click 

 and then click 

.

7. Enter the path and file name of the file that contains the response from the CA, and then 

click 

.

8. Examine the certificate overview, click 

, and then click 

.

A certificate is now installed on the ETV Portal Server web server.

After installing the certificate on the ETV Portal Server web server, the ETV Portal Server 
can now be configured to require SSL access.

T

To configure ETV Portal Server for SSL access:

1. Start Internet Information Services, if it's not already running.
2. Right click on 

. Select 

. 

3. Go to the 

 tab. 

4. Under 

, click 

.

If the 

 button is not available, the certificate may not have been installed correctly. Go 

back to Install the Certificate on the ETV Portal Server web server section, and verify 
that the certificate is installed.

5. Click 

 check box.

6. Client's browsing to file must now use HTTPS protocol.
7. Click 

, and then click 

 again to close the Properties dialog box.

8. Alternatively, if only the Logon pages and the admin pages need to be secured, right-click 

the following files, one at a time, and then click 

.

Login.aspx

 (Select 

 rather than Directory Security)

Admin

9. Repeat Steps 3–6 for both files for all required ETV Portal Server resources configured.
10. Close 

.