Fujitsu RX900 S1 Manual Do Utilizador

126

Maintenance Manual

 RX900 

S1

Ê

Open the slot to be fitted (1).

Ê

Remove the slot lock by pulling the green handle upward (2), pushing the 
plastic part down (3) and lifting the slot lock (4).

Ê

Pull the removal tool out of the slot by the handle (5).

Figure 64: Removing the retaining plate from the removal tool

Ê

Lift the green movable engaging hooks (see arrows) no more than 
approximately 1 mm until the retaining plate is completely released.

V

The engaging hooks may easily be damaged if too much pressure is 
applied.

Ê

Take the retaining plate out and put it aside.