Fujitsu TX200 Manual Do Utilizador
234
Chapter 8 Configuring Hardware and Utilities
8.2.2 Main Menu
The [Main] menu is initially displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured on the [Main] menu.
table: Items on the Main Menu
Item
Setting
Description
System Time
Present time
The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
System Date
Present date
The system date is set in "month:day:year" format.
For example, August 20, 2005 is set as "08", "20",
"2005".
For example, August 20, 2005 is set as "08", "20",
"2005".
Diskette A
1.4M (Fixed parameter)
Sets the type of Floppy Disk Drive A (recording
density and drive size).
density and drive size).
IDE Drive1
Sets the type and operating mode for connected IDE devices.
After selecting the IDE device to be set, press the [Enter] key to display the "8.2.3
IDE Drive Submenu" (
After selecting the IDE device to be set, press the [Enter] key to display the "8.2.3
IDE Drive Submenu" (
pg.235) window.
IDE Drive2
IDE Drive3
IDE Drive4
Boot Options
Sets system startup options. Press the [Enter] key to display the "8.2.4 Boot
Options Submenu" (
Options Submenu" (
pg.236) window.
Base Memory
A usable base memory size of less than 1MB appears.
Extended Memory
A memory size of more than 1MB appears.