Fujitsu TX150 S3 Manual Do Utilizador
U41604-Z156-1-76
Options Guide
33
Controller in the PCI slots
Installing a controller
Figure 24: Installing a controller
Ê
Install the controller in the PCI slot and press it carefully into the associated
plug-in location on the system board (1) until it engages properly.
plug-in location on the system board (1) until it engages properly.
Ê
Place the clip on the slot cover in such a way that the pin (a) fits into the hole
of the slot cover (2), and press the clip in the direction of the arrow (3) until
it engages.
of the slot cover (2), and press the clip in the direction of the arrow (3) until
it engages.
Ê
Swing the locking swivel (4) in its locking position.
Ê
If required, connect the cables to the controller and other components.
Ê
Close the server, connect it to the power outlet, and switch it on as described
in the chapter “Completion” on page 59 et seqq. .
in the chapter “Completion” on page 59 et seqq. .
a
1
3
3
2
4