Fujitsu 2000 SERIES Manual Do Utilizador
CHAPTER 6 PCI Express card Hot Maintenance in Windows
6.5 Hot Replacement Procedure for iSCSI
6.5 Hot Replacement Procedure for iSCSI
145
C122-E175-01EN
10. Confirm replaced FC card by using Device Manager.
Open Device Manager, and confirm that the target device is recognized correctly.
Note
As the follow, right-click target device in Device Manager, if there are [Enable] in displayed menu, check
[Enable].
(In case of [Disable], this work is not necessary)
Note
As the follow, right-click target device in Device Manager, if there are [Enable] in displayed menu, check
[Enable].
(In case of [Disable], this work is not necessary)
6.4.2 FC card addition procedure
Referring to
, add an FC card.
6.5
Hot Replacement Procedure for iSCSI
The prerequisites for iSCSI (NIC) hot replacement are as follows.
-
The maintenance person has the Administrator privileges required for operations.
-
The ETERNUS multipath driver (MPD) has been applied.
-
To replace more than one card, one card at a time will be replaced.