Fujitsu 2000 SERIES Manual Do Utilizador
CHAPTER 6 PCI Express card Hot Maintenance in Windows
6.5 Hot Replacement Procedure for iSCSI
6.5 Hot Replacement Procedure for iSCSI
150
C122-E175-01EN
6.5.2 Disconnecting MPD
This section describes the procedure for disconnecting MPD.
1. Start ETERNUS Multipath Manager.
2. Confirm the address value recorded in step 10 in
Then, place the target device offline. For a multifunction card, it is necessary to place more than one
device offline.
device offline.
Note
In case of multi-function card, there are some cards that have same segment number, same bus number,
and different function numbers.
In this case, please perform Step.3 to Step.5 of follows respectively.
In case of multi-function card, there are some cards that have same segment number, same bus number,
and different function numbers.
In this case, please perform Step.3 to Step.5 of follows respectively.
3. Confirm target NIC in Device Manager.
4. Disable target NIC in Device manager.
in
5. Stop target NIC by using safely remove devices from computer.
in