Toshiba Satellite R10 Manual Do Utilizador
4 Replacement Procedures
4.21 Speaker
Satellite R10 Maintenance Manual (960 -509)
4-47
4.21 Speaker
Removing the speaker
The following describes the procedure for removing the speaker. (See Figure 4-32.)
1. Turn up the insulator.
2. Pull out the speaker cable from the guide insulator of cover assembly.
3. Pull out the speaker from the slot of cover assembly.
Figure 4 -32 Removing the speaker
Install ing the speaker
The following describes the procedure for installing the speaker. (See Figure 4-32.)
1. Install the speaker to the slot of cover assembly.
NOTE: When installing the speaker, confirm the right installation of right and left
speaker. (Right = Red and Green cable, Left = White and Green cable).
2. Arrange the speaker cable along the guide insulator.
3. Stick the insulator over the guide of speaker cable.
Guide insulator
Speaker cable
Insulator
Speaker (R)
<White & Green cable >
<White & Green cable >
Speaker (L)
<Red & Black cable >
<Red & Black cable >
Guide insulator