Fujitsu M4099D Manual Do Utilizador
6-57
1.
Put sheets of paper on the hopper table.
2.
In the <<TEST MODE>> initial screen, press
ENTER
.
The <<TEST MODE>> menu screen (Offline
Feed Test) appears.
Feed Test) appears.
3.
Press
ENTER
again.
The scanning parameters screen indicates the
current parameters with START blinking (blinking
indicates “selectable”).
current parameters with START blinking (blinking
indicates “selectable”).
4.
Press
.
SETUP blinks (blinking indicates “selectable”).
5.
Press
ENTER
.
The LCD changes to the parameter set screen
with S (simplex mode) blinking (blinking indicates
“selectable”).
with S (simplex mode) blinking (blinking indicates
“selectable”).
6.
Press
.
A4P (A4 size in portrait orientation) blinks
(blinking indicates “selectable”).
(blinking indicates “selectable”).
Offline feed test
This function scans sheets of paper continuously for checking entire operation of the mechanism
without a host computer. You can use the Settings function in setup mode to modify scanning
parameters (scanning mode, paper size/orientation, density, resolution, and halftone processing) for
scanning documents.
without a host computer. You can use the Settings function in setup mode to modify scanning
parameters (scanning mode, paper size/orientation, density, resolution, and halftone processing) for
scanning documents.
Remarks
START: begins the test.
SETUP: changes settings of scanning
SETUP: changes settings of scanning
parameters.
LCD display
Offline Feed Test
Test items
START and SETUP
* For SETUP operation, see the “Settings” function previously described in this chapter.
The following is an example of operation when you start the offline feed test after setting scanning
parameters.
parameters.
<<TEST MODE>>
<<TEST MODE>>
Offline Feed Test
S A4P AT2 200 LA
START SETUP
S A4P AT2 200 LA
START SETUP
S A4P AT2 200 LA
AT2 LA
AT2 LA
S A4P AT2 200 LA
AT2 LA
AT2 LA