Fujitsu M3097G+ Manual Do Utilizador

5 – 2

Note the following points on daily use:

• The image scanner requires one to three minutes to warm up after

the power has been turned on.  During this time, the message
“Warming-up Now!!” is displayed on the screen.

• Do not look directly at the light source during the read operation.

Keep the document cover in place.

• See Section 5.3 “Cleaning”, to clean the document cover, document

holding pad, document bed, and the automatic document feeder.

Especially, clean the ADF periodically.  For cleaning cycle, see
Section 5.3.2 “Cleaning the ADF”.

This section explains how to clean the image scanner.

• Use a dry cloth or a cloth with a neutral cleanser or ethyl alcohol to

remove dirt from the document cover, document holding pad, and
document bed.

Do not use organic solvents such as a thinner.

• Make sure that no liquid enters the scanner from the edges of the

document bed glass.

Cloth

Neutral cleanser
or ethyl alcohol

Thinner

Document cover

Document holding pad

Document bed