Visioneer 220 Manual Do Utilizador

S

TEP

 2: C

ONNECT

 

THE

 P

OWER

 S

UPPLY

 

AND

 USB C

ABLE

You may now connect the scanner’s power supply and USB cable. The 
USB cable plugs into any available USB port on the computer. Check 
your computer’s manual for USB port locations.

Attach a Plug Adapter to the Power Supply
1. You received three plug adapters with your scanner. Use the correct 

adapter for the electrical wall outlet at your location.

The three plug adapters are for:

2. Position the adapter so it aligns with the edges of the power supply 

and will slide onto the post in the middle of the two contacts. 
Gently slide the adapter forward until it snaps into place. 

Note: You can connect the scanner to your computer while the 
computer is running. You do not have to shut down your computer.

Note: Remember to take the plug adapters with you when travelling 
to countries with different electrical outlets. To remove an adapter, see 
the section, “How to Replace the Plug Adapter” on page 120.

United States

United Kingdom

Europe