Wacom DTK-2200 Manual Do Utilizador
14
14
STEP 1: HARDWARE INSTALLATION
In this step, connect the video, USB, and power cables.
If you have not already done so,
Important: Never connect or disconnect the video or power cables while your computer or pen
display are powered on. This can damage the display or video card.
display are powered on. This can damage the display or video card.
1. Turn off your computer.
2. Determine if your computer has a digital (DVI) or analog (VGA) port. If your computer has only one
video port, unplug your previous monitor or add a second video card. For best results, connect Cintiq
to a DVI-D or DVI-I card.
to a DVI-D or DVI-I card.
3. Follow the below instructions for your video port. Make sure to tighten any connector thumbscrews.
See – A – in the
.
4. Plug the USB connector into an available USB port on your computer or USB hub attached to your
computer. See – B – in the
5. Connect the power adapter to Cintiq. See – C – in the
.
6. Connect the adapter power cable and plug into an AC outlet. See – D – in the
.
7. Turn on the pen display. The power LED will glow orange.
For DVI operation, connect the Cintiq video cable to the DVI port located on your
computer video card.
computer video card.
The Cintiq video cable has a DVI-D connector. Cintiq can be connected to either a DVI-D
or a DVI-I card.
or a DVI-I card.
For VGA operation, you will need to obtain a Wacom accessory DVI-I to VGA adapter
cable. See
cable. See
Remove the DVI-D cable from Cintiq and replace it with a DVI-I to VGA adapter cable.
See
See
. Connect the adapter cable between the Cintiq and
your video card.
If connecting to a Mac Mini DisplayPort, you will need to obtain an appropriate
active adapter cable, such as those offered by Kanex, Apple, or other manufacturers.
Check with your local product retailer or an online outlet for availability.
active adapter cable, such as those offered by Kanex, Apple, or other manufacturers.
Check with your local product retailer or an online outlet for availability.
Connect the adapter between the DVI-D end of the Cintiq video cable and your Mac.
DVI-I
DVI-D
VGA