Honeywell SC1000 Manual Do Utilizador
SC Series Instruction Manual page 23
Operat
ing Modes
3
3.5 SETUP Menu mode
The SETUP Menu mode is used to display or change the settings that control the
operation of the instrument.
operation of the instrument.
3.5.1 Available Menus
Each major function of the instrument has its own SETUP Menu. See “Setup Menu
Reference” on page 157.
Reference” on page 157.
3.5.2 Entering and
Exiting the SETUP Menu
mode
To enter the SETUP Menu mode, press and hold the [UP] and [DOWN] buttons at the
same time until you see “
same time until you see “
SETUP
” on the display. When you release the buttons, you will
see the first SETUP Menu item.
3.5.3 Moving Through
SETUP Menus and Menu
Items
The following table shows how to move though menus and menu items, and how to
display or change the setting of a particular item.
display or change the setting of a particular item.
To change the setting of a menu item:
Press [ENTER] to display the current setting, which is preceded by the ‘
Press [ENTER] to display the current setting, which is preceded by the ‘
*
’ character.
Press [UP] or [DOWN] until you see the setting you want. To abandon changes, press
[EXIT]. To accept the new setting and move to the next item, press [ENTER].
[EXIT]. To accept the new setting and move to the next item, press [ENTER].
3.5.4 Exiting the SETUP
Menu mode
To leave SETUP mode and return to the RUN mode, press [EXIT] at any time.
Table 3-1: Navigating the Menus
Button
Action
[UP] or [DOWN]
Scroll through available menus, sub-menus or menu items.
[ENTER]
Select a menu, sub-menu or menu item
[EXIT]
If changing a setting: abandons changes to a menu item
otherwise: leaves the SETUP mode.