GE 165D4700P192 Manual Do Utilizador

7

Control Panel

1

2

3

4

5

1. The Status

The Status display tells you what is happening while the dishwasher is in operation and also any
malfunctions if they occur. The lights will come ON indicating the sequence of operation the
dishwasher is in.

SENSING

Displayed during periods using CLEANSENSOR technology to measure 
the amount of soil in the load and decide if another prewash is needed. The 
SENSING light is displayed only during the NORMAL and POTS PANS cycles.

WASHING

Displayed during prewash and main wash periods.

RINSING

Displayed during rinse periods.

DRYING

Displayed during SPEED DRYING.

SANITIZED

Displayed when cycle has met sanitization conditions. Light remains ON until 
door is opened.

2. Load Selections

The light above the selected pad will be ON to indicate which LOAD SELECTION has been
selected.

SANI WASH

This cycle raises the water temperature in the final rinse to sanitize your 
dishware. The cycle length will vary depending on the temperature of 
your inlet water.
NOTE: 

The SaniWash cycle is monitored for sanitization requirements. 

If the cycle is interrupted during or after the main wash portion or if the 
incoming water temperature is so low that adequate water heating cannot 
be achieved, the sanitizing conditions will not be met. In these cases, the 
sanitized light will not illuminate at the end of the cycle.

POTS PANS

For heavily soiled dishes or cookware with dried-on or baked-on soils. 
Everyday dishes may be included. This cycle will not remove burned-on 
foods.

NORMAL

For loads of everyday dishes and glassware with medium soils. 

CHINA 

For lightly soiled china and crystal. 

CRYSTAL

SPEED WASH

For lightly soiled dishes and glassware.

RINSE & HOLD

For rinsing partial loads that will be washed later.  Do not use detergent with 
this cycle.