Lexmark 642e MFP Manual Do Utilizador
91
2
Understanding MFP messages
Messages appear on the MFP control panel LCD describing the current state of the MFP and indicating possible MFP
problems requiring intervention.
problems requiring intervention.
Status messages
Status messages provide information on the status of the MFP.
Message
Meaning
Action
Busy
The MFP is busy receiving,
processing, or printing data.
processing, or printing data.
Press Stop to access the job queue.
Defragmenting Flash
DO NOT POWER OFF
DO NOT POWER OFF
The MFP is defragmenting the flash
memory to reclaim storage space
occupied by deleted resources.
memory to reclaim storage space
occupied by deleted resources.
Warning:
Do not turn the MFP off while this message
is displayed.
Wait for the message to clear.
Disabling Menus
The MFP is responding to a request
to disable the menus by turning
Menu Lockout to Off.
to disable the menus by turning
Menu Lockout to Off.
Wait for the message to clear.
Note: While the menus are disabled, printer settings
from the LCD cannot be changed. Only a system
support person should disable menus.
from the LCD cannot be changed. Only a system
support person should disable menus.
Enabling Menus
The MFP is responding to a request
to enable the menus by turning
Menu Lockout to On.
to enable the menus by turning
Menu Lockout to On.
Wait for the message to clear.
Flushing Buffer
The MFP flushes corrupted data and
discards the current print job.
discards the current print job.
Wait for the message to clear.
Formatting Flash
DO NOT POWER OFF
DO NOT POWER OFF
The MFP is formatting the flash
memory.
memory.
Warning:
Do not turn the MFP off while this message
is displayed.
Wait for the message to clear.
Hex Trace
The MFP is in Hex Trace mode.
Hex Trace isolates the source of a
print job problem. When Hex Trace is
active, all data sent to the MFP prints
in hexadecimal and character
representation.
print job problem. When Hex Trace is
active, all data sent to the MFP prints
in hexadecimal and character
representation.
Exit Hex Trace to print jobs normally. To exit Hex
Trace, unplug the MFP.
Trace, unplug the MFP.
Invalid Engine Code
The MFP engine code is not
programmed or if programmed, it is
invalid.
programmed or if programmed, it is
invalid.
Download valid engine code to the MFP.
Note: Engine code may be downloaded while this
message is displayed.
message is displayed.
Invalid Network Code
The code in an internal print server
is not valid. The MFP cannot receive
and process jobs until valid code is
programmed into the internal print
server.
is not valid. The MFP cannot receive
and process jobs until valid code is
programmed into the internal print
server.
Download valid code to the MarkNet N8000 Series
internal print server.
internal print server.
Note: Network code may be downloaded while this
message is displayed.
message is displayed.
Invalid Scanner Code
The scanner code is not
programmed or if programmed, it is
invalid.
programmed or if programmed, it is
invalid.
Download valid scanner code to the MFP.
Note: Scanner code may be downloaded while this
message is displayed.
message is displayed.