Fujifilm FinePix Z10fd 15777361 Manual Do Utilizador

14

Charging the Battery

Z <Charging Indicator and Statuses>

• Unplug the battery charger from the power outlet when 

it is not in use.

• If the terminals of battery are soiled, it may not be 

possible to charge it. Clean the battery terminals and 
battery charger terminals with a clean, dry cloth.

• Charging times increase at low temperatures.
• The NP-45 gradually loses its charge even when not 

used. Charge a NP-45 just before taking pictures (in the 
last day or two).

Turn the camera on and check the battery level indicator 
on the LCD monitor.

A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The 

battery will soon run out. Have a charged battery 
ready. (Lit red)

D The battery is depleted. The display will shortly go 

blank and the camera will stop working. Replace or 
recharge the battery. (Blinking red)

• Due to the nature of the battery, the battery level 

indicator (

, 

, or V) may appear early 

when the camera is used in cold locations. Try warming 
the battery in your pocket or a similar location before 
use.

• Battery with no remaining charge (V blinking red) 

may cause camera faults. Always load a fully charged 
battery.

• Depending on the camera mode, the transition from 

 to V may occur more quickly.

Off

Battery not loaded

Load the battery to be 
charged.

Fully charged 
(charging complete)

Remove the battery 
from the battery 
charger.

Lit red

Charging

–

Blinking red

Battery fault during 
charging

Unplug the battery 
charger and remove 
the battery from the 
battery charger.