Zanussi ZHC 955 Manual Do Utilizador
12
Installation
Fig. 6
Mounting accessories included
1 deflector (+ spacers adapter)
2 metal screws 3,5 x 13 (to fix spacers adapter to
2 metal screws 3,5 x 13 (to fix spacers adapter to
deflector).
2 metal screws 3 x 9 (to fix upper chimney
section)
12 metal screws 3,5 x 9,5 (6 to fix motor unit to
lower part of the hood, 4 to fix deflector to
chimney support, 2 to fix lower chimney
section)
chimney support, 2 to fix lower chimney
section)
1 chimney support (3 pieces to assemble)
4 metal screws 4 x 8 (to assemble the chimney
4 metal screws 4 x 8 (to assemble the chimney
support)
5 wood-screws 5 x 45 mm (for wall mounting)
5 wall plugs Ø 8 mm (for wall mounting)
1 allen spanner (for TORX 10/20 screws)
1 support bracket
5 wall plugs Ø 8 mm (for wall mounting)
1 allen spanner (for TORX 10/20 screws)
1 support bracket
Assembling the chimney flue
support/bracket (3 parts):
support/bracket (3 parts):
The three parts should be fixed with 4 screws,
the support extension is adjustable and should
correspond to the internal width of the
telescopic chimney flue. Fig. 6.
the support extension is adjustable and should
correspond to the internal width of the
telescopic chimney flue. Fig. 6.
Assembling the deflector
(3 parts – only for recirculation
mode):
mode):
The three parts should be fixed with 2 screws,
the deflector extension is adjustable and should
correspond to the width of the chimney flue
support, to which it is then fixed. Fig. 6.
the deflector extension is adjustable and should
correspond to the width of the chimney flue
support, to which it is then fixed. Fig. 6.
=
=
X
X
H
=
=
X
F
F
G
G