Vertex Standard FT-857 Manual Do Utilizador

1. If you currently are in the VFO tuning mode, press the [M/V] key once to enter the

“Memory” mode (a memory channel number “M-nnn” will appear on the display in the
space previously occupied by “VFOa” or “VFOb”).

2. To select another memory channel, turn the SELECT knob.
3. When your memory channels are partitioned into Memory Groups via Menu Mode No-

055 [MEM GROUP], it is easy to change Memory Groups; press the SELECT knob
momentarily (a Group Number (“Ma” ~ “Mj” will blink), then turn the SELECT knob
to step through the channels until you enter another. You may now press the SELECT
knob once more to restrict memory channel access to the newly-selected Group.

4. Once you are operating on a memory channel, you may tune off of the originally-memo-

rized frequency (as though you were in the VFO mode). Just rotate the DIAL knob; the
“Memory Channel Number” will be replaced by one which indicates “MTUNE,” indicat-
ing that you have now shifted into the “Memory Tuning” mode. When operating the
Memory Tuning mode, if you find another frequency you wish to store into another
memory channel, just press the [A](MW) key momentarily, select a new memory chan-
nel via the SELECT knob, then press and hold in the [A](MW) key until you hear the
double beep.

5. To exit the Memory Tuning mode, press the [M/V] key as follows:

•

One touch of the [M/V] key returns you to the original memory frequency.

•

A second touch of the [M/V] key will cause you to exit the Memory mode and return
to the VFO mode (the memory channel number will be replaced by “VFOa” or
“VFOb.”

 “R

” M