Vertex Standard VM-3500E Manual Do Utilizador
Page 11
VM-3500E
6.6 CHANGING THE GPS TIME
From the Factory the VM-3500E shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
offset is needed to show the local time in your area.
1. Press and hold down the [CALL] key until “Radio
Setup
” menu appears.
2. Press the [ENT] key, then select “Time Set” with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select time off-
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ENT] key to store the time offset.
6. Press the [16/9] key or turn the CHANNEL selector knob to select “Exit,”
6. Press the [16/9] key or turn the CHANNEL selector knob to select “Exit,”
then press the [ENT] key to return to the “Radio Setup” menu, select “Exit”
and press the [ENT] key to return to radio operation.
and press the [ENT] key to return to radio operation.
O
FFSET
T
IME
T
ABLE