Vertex Standard VM-3500E Manual Do Utilizador
VM-3500E
Page 58
11.3 PA/FOG OPERATION
The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells
and whistles.
and whistles.
12.3.1 Operating the PA / Hailer
1. Press and hold the [NAV] key then select PA with the [
] or
[
] key.
2. Press the [CALL/SET] key.
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
the [
] or [] keys to adjust the Audio output level. The
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [VOL] Key, then press the [
] or [] key to the
desired listen back volume.
To exit from the PA Hailer mode, press the [CALL/SET], [16/9],
or [WX] key.
or [WX] key.
11.3.2 Operating the FOG Horn
The VM-3500E is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.
Aground and Anchor signals.
1. Press and hold the [NAV] key then select FOG with the [
]
or [
] key.
2. Press the [CALL/SET] key.
3. Select the one of the eight functions described above with
3. Select the one of the eight functions described above with
the [
] or [] key and press the [CALL/SET] key.
4. On the “
Horn
” and “
Siren
” modes, press the PTT switch to
activate the tone through the HAIL/PA speaker.
Press the [
Press the [
] or [] keys to adjust the Audio output level.
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
press the [VOL] Key, then press the [
] or [] key to the
desired listen back volume.
To exit from the FOG HORN mode, press the [16/9], [WX], or
[CALL/SET] key.
[CALL/SET] key.