Vertex Standard HX760S Manual Do Utilizador
HX760S
Page 32
7. BH-2 Bluetooth
®
HEAD SET OPERATION
The optional BH-2 Bluetooth
®
Head Set can communicate your voice and
receiving signal to/from the HX760S, with the Bluetooth
®
technology.
7.1 PAIRING
Before you use your BH-2 for the first time, the BH-2 and the HX760S must be
paired.
paired.
1. Make sure that the BH-2 and HX760S is both off.
2. Hold down the HX760S’s [SQL] key, and then turn on
2. Hold down the HX760S’s [SQL] key, and then turn on
the transceiver while still holding down the [SQL] key to
activate the Menu (“Set”) Mode. “SEt
activate the Menu (“Set”) Mode. “SEt
SEt
SEt
SEt
SEt
” will appear on the
display.
3. Press the [SQL] key to select the Menu item “14 bt
14 bt
14 bt
14 bt
14 bt
”.
4. Press the [T] or [S] key to select desired Operation Mode
of the BH-2 (except “oFF
oFF
oFF
oFF
oFF
”).
Ptt
Ptt
Ptt
Ptt
Ptt
:
Activates the Bluetooth
®
function without the Bat-
tery Save and VOX features.
PttSV
PttSV
PttSV
PttSV
PttSV
: Activates the BH-2 with the Battery Save feature.
If there has been no signal or key activity for 20
seconds, the Battery Saver automatically puts the
BH-2 to “sleep”, to conserve battery life. When signal is received or
the PTT switch is pressed, the BH-2 will be active again.
Furthermore, if there has been no signal or key activity for 10 min-
utes, turns the BH-2 off automatically.
seconds, the Battery Saver automatically puts the
BH-2 to “sleep”, to conserve battery life. When signal is received or
the PTT switch is pressed, the BH-2 will be active again.
Furthermore, if there has been no signal or key activity for 10 min-
utes, turns the BH-2 off automatically.
Hi
Hi
Hi
Hi
Hi
:
Activates the BH-2 with the VOX feature (VOX gain: High).
Lo
Lo
Lo
Lo
Lo
:
Activates the BH-2 with the VOX feature (VOX gain: Low).
oFF
oFF
oFF
oFF
oFF
:
Disable the BH-2.
Note: When pairing, select “Ptt
Ptt
Ptt
Ptt
Ptt
”, “PttSV
PttSV
PttSV
PttSV
PttSV
”, “Hi
Hi
Hi
Hi
Hi
” or “Lo
Lo
Lo
Lo
Lo
”. If “oFF
oFF
oFF
oFF
oFF
” is selected, it
is impossible to so pairing, because the Bluetooth
®
function is not active.
5. Press the [SQL] key.
6. Press the [SQL] key again to select the Menu item
6. Press the [SQL] key again to select the Menu item
“15 Pin
15 Pin
15 Pin
15 Pin
15 Pin
”.
7. Press and hold the [MEM] key until “PAr
PAr
PAr
PAr
PAr
” appears.
8. Press and hold the POWER switch of the BH-2
until the LED indicator blinks red/blue alternately (approxi-
mately five seconds).
mately five seconds).
9. When the BH-2 is correctly recognized (requires a 20 to
30 seconds) by the HX760S, the LED indicator of the
BH-2 will blink blue and “SUCCESS
BH-2 will blink blue and “SUCCESS
SUCCESS
SUCCESS
SUCCESS
SUCCESS
” notation will appear
on the display of the HX760S for few seconds.