Nintendo SPR-001 Manual Do Utilizador

For loading Nintendo 3DS Game Cards, Nintendo DS Game Cards, 
Nintendo DSi Game Cards and Nintendo DSi enhanced Game Cards.

The lower screen, or Touch Screen, is touch sensitive. For software that supports this control  
feature, use the included Nintendo 3DS XL stylus.

For attachment of a wrist strap  
(sold separately).

Sends and receives signals for software with  
infrared functionality.

Used to store the Nintendo 3DS XL 
stylus.

Can be removed to replace the Nintendo 3DS XL 
Battery Pack.
Note: Please refrain from removing unless it is  
absolutely necessary.

Allows recharging via the 
 Nintendo 3DS XL charging cradle  
(SPR-007) (sold separately).

Allows connection of the Nintendo 3DS AC 
adapter (WAP-002(UKV) / WAP-002(EUR))  
(sold separately).

Used by software with camera functionality.  
These two cameras allow 3D photographs /  
videos to be taken.

When you are finished with the stylus, place it firmly back into the stylus 
holder.

Note: Do not attempt to place anything other than the Nintendo 3DS XL stylus  
(SPR-004) into the stylus holder.

Gently pressing the Touch Screen  
with the stylus is called “touching”  
(or “tapping”).

Tracing over the Touch Screen with the 
stylus held gently against it is called 
“sliding”.

The following terms are used to describe the use of the stylus on the Touch Screen in this manual.

This LED lights up when the  
outer cameras are in use.

Go to the HOME Menu and into the System Settings, then select TOUCH SCREEN to calibrate the Touch Screen 

. If you are having 

trouble operating the HOME Menu via the Touch Screen, you can start the system on the Touch Screen Calibration Screen by pressing the 
POWER Button while pressing and holding L Button + R Button + X Button.

Used for inserting SD Cards  
(SD Memory Cards or SDHC 
Memory Cards). The included 
SDHC Card comes pre-inserted 
into the system.