Nintendo SPR-001 Manual Do Utilizador

You can set up a connection quickly and easily using Wi-Fi Protected Setup. Refer to the instruction manual of your access point for further  
information.

Note: After configuring the access point, touch NEXT on the Touch Screen of your 
Nintendo 3DS XL system.

Touch 

Note: If you are using the tutorial and you have selected 

, start from step 

.

Note: It may take around 2 minutes to complete setup.

 

If the test is successful, setup is complete.

 

Failure to establish a connection can sometimes occur after Wi-Fi Protected Setup is complete. If this happens, please wait a short 
while before trying to reconnect.

You can use this method to search for and connect to an access point if your access point does not support AOSS or Wi-Fi Protected Setup. You 
should also consult the instruction manual that came with your access point.

Note: Touch the name of the access point you want to connect to (its SSID, ESSID or network 
name). If you do not know this name, please consult the settings of the access point you are using.

Note: If you are using the tutorial and have selected DON’T KNOW / NONE OF THESE or  
OTHER, start from step 

.

 

This step only applies if the access point is secured. If you do not know the security key, please consult the settings of the access 
point you are using.

 

The characters for the key you entered will be hidden by asterisks (*).

Note: A security key is the password set for your access point and is required to enable your Nintendo 3DS XL system to make an internet connection.  
It may also be called an encryption key or network password.

 

If the test is successful, setup is complete.

 

If connection fails and an error appears, follow the instructions given in the error message.