Friedrich SC06 Manual Do Utilizador

4

Figure 2

Function control

There are four positions:

Turn to OFF to turn everything off.

Hl  COOL - The fan runs continuously at high speed to 
cool the room quickly; the compressor goes on and off to 
maintain the temperature selected.

LO  COOL - The fan runs continuously at low speed for 
gentle circulation of cooled air; the compressor goes on and 
off to maintain the temperature selected.

FAN ONLY - The fan runs alone without the compressor 
and circulates air without cooling.

To remove filter

Remove  the  slotted  screws  from  each  side  of  the  plastic 
front panel and remove the panel (Figure 3).  The fi lter can 
now be removed for cleaning. Use caution when removing 
the fi lter.  The internal metal components are sharp.  Clean 
with warm water and a mild detergent, rinse, shake out, 
and allow to dry.

Replace the fi lter in the unit, and replace the front.  This 
should be done on a regular basis during the cooling 
season.

Your Friedrich Casement model is a high effi ciency unit 
designed to be installed in a casement window that does 
not permit the use of a standard window model. It is simple 
to operate and gives you optimum performance despite its 
small size.

To start unit

If your air conditioner is installed and plugged into a proper 
receptacle, it is ready to go.

Temperature control

The right hand knob is the thermostat, turn it clockwise for 
cooler, counter clockwise for warmer.

Figure 3

How to operate your Friedrich room air con di tion er