Philips 48HFL5010T/12 Manual Do Utilizador

Use the Common Interface slot on the TV to insert the
CAM card.
With the front of the card facing towards you, gently
insert the CAM as far as it will go.
Leave the card in the slot permanently.

It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.

CAM settings

To set passwords or PIN codes for the CAM TV
broadcast, press

 and select Setup and press OK.

Select Channel settings > Common Interface.
Select the CAM TV broadcaster and press OK.

2.4

Set-top box - STB

Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.

Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.

Switch off timer

Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.

To switch off the Switch off timer:

Professional Mode: Off

 Press  and

select Setup and press OK.
Professional Mode: On

 Enter the Professional

Home Menu.

Select TV settings > General settings > Switch off
timer and set the slider bar to Off.

2.5

Home Theatre System - HTS

Connect HTS