Philips PPX4150A/INT Manual Do Utilizador

1 Switch the device on using the on/off switch on the 

side.

2 After the initial screen, press 

à.

3 Use 

/ to select from the following settings.

4 Confirm with 

à.

5 Select or modify the settings using 

à, //À/

Á, 

6 Confirm with 

à. 

The 

 key takes you one step back in the menu.

Fit Screen – Convert videos and images to 4:3 or 
16:9 resolution
Projection mode

Front – Normal projection; the device is located 
in front of the projection surface/screen

Rear – Rear projection; the device is located 
behind the projection surface; the image is 
reflected horizontally.

Rear ceiling – The device is located behind the 
projection surface, hanging from the ceiling in an 
upside-down position; the image is rotated 
through 180 degrees and reflected horizontally.

Ceiling – The device is hanging from the ceiling in 
an upside-down position; the image is rotated 
through 180 degrees.

Smart Settings – Select predefined settings for 
brightness / contrast / colour saturation. If you mod-
ify these settings, the setting is switched to Stand-
ard.
Brightness – Adjust brightness
Contrast – Adjust contrast
Saturation - Adjust saturation

Volume – Adjust the volume
Bass – Set the playback of the low frequencies
Treble – Set the playback of the high frequencies
Key beep – Turn key tones on and off

Optimal: the brightness according to your set-
tings.

ECO mode: this function reduces the light out-
put  in  order  to  increase  the  operating  time  for 
the built-in battery. When operating from the 
power supply, the energy saving mode is always 
deactivated in order to ensure the best-possible 
image display.

Language – Select the desired language for the menu.

Reset settings – Reset settings to factory defaults.
Information – Device name / Model / Firmware ver-
sion

PPX4150_UM_EN_253617510.book  Page 10  Vendredi, 6. février 2015  2:49 14