Lexmark C720 Guia De Referência
PCL
2-19
Font and Symbol Set Support for the Lexmark E322
Your printer supports 77 fonts in PCL emulation, including 75 scalable fonts and two
bitmapped fonts.
bitmapped fonts.
Several parameters are used to select a font from the data stream. These include
symbol set, spacing, point or pitch, style, weight, and typeface number. Print the font
sample pages to view the specific parameters for each font. For scalable fonts, you
can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you
must choose the pitch or point size listed on the font sample pages. You can print the
font sample pages from the printer operator panel or through MarkVision. Refer to
your printer user documentation for more information.
symbol set, spacing, point or pitch, style, weight, and typeface number. Print the font
sample pages to view the specific parameters for each font. For scalable fonts, you
can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you
must choose the pitch or point size listed on the font sample pages. You can print the
font sample pages from the printer operator panel or through MarkVision. Refer to
your printer user documentation for more information.
A symbol set defines which characters are available for a font and the code point for
each of these characters. The tables beginning on page 2-20 show the symbol sets
available for each font in PCL emulation. Not all fonts support all symbol sets.
each of these characters. The tables beginning on page 2-20 show the symbol sets
available for each font in PCL emulation. Not all fonts support all symbol sets.
You can select a font as the PCL emulation default from the printer operator panel or
through MarkVision. Refer to your printer user documentation for more information.
through MarkVision. Refer to your printer user documentation for more information.
The fonts are divided into two major groups. The first 47 fonts (R0 to R46) shown on
the font sample pages are the standard PCL emulation fonts. The 30 remaining fonts
(R47 to R76) are called Type 1 fonts and were originally defined for PostScript
emulation, but now also work in the PCL emulation.
the font sample pages are the standard PCL emulation fonts. The 30 remaining fonts
(R47 to R76) are called Type 1 fonts and were originally defined for PostScript
emulation, but now also work in the PCL emulation.
For compatibility purposes, you can disable Type 1 fonts with the Printer Job
Language (PJL) LTYPE1FONTS command. The factory default for these fonts is
Enabled. See LTYPE1FONTS on page 3-47 for more information.
Language (PJL) LTYPE1FONTS command. The factory default for these fonts is
Enabled. See LTYPE1FONTS on page 3-47 for more information.
You can also select fonts using PJL commands. The selection parameter is the
number portion from the font identifier shown on the font sample pages, such as 0 or
76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning
on page 2-20 to select a symbol set. If a symbol set does not have a PJL value, use
the symbol set ID to select the symbol set. A font selection can be either temporary or
set as the default.
number portion from the font identifier shown on the font sample pages, such as 0 or
76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning
on page 2-20 to select a symbol set. If a symbol set does not have a PJL value, use
the symbol set ID to select the symbol set. A font selection can be either temporary or
set as the default.
Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,
PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: “Common Variables for
PCL Emulation” on page 3-48 for more information about these commands.
PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: “Common Variables for
PCL Emulation” on page 3-48 for more information about these commands.