Fujifilm 3800 Guia De Utilização
83
6
82
POWER SAVE
SET–UP
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
●
!
Operation can also be restored by pressing buttons
other than the shutter button.
other than the shutter button.
Bebeep
◆
To restore power to the camera
◆
Turn the Power switch to
“OFF” briefly and then
back to “q”.
“OFF” briefly and then
back to “q”.
ＯＫ
ＢＡＣＫ
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
ＤＡＴＥ／ＴＩＭＥ
ＤＡＴＥ／ＴＩＭＥ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＯＦＦ
ＤＳＣ
ＳＥＴ
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＰＯＳＴＶＩＥＷ
ＰＯＳＴＶＩＥＷ ＯＮ
hPower saving “OFF” (default setting)
The camera does not use measures such as
“sleep” to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.
The camera does not use measures such as
“sleep” to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.
hPower saving “ON”
Power consumption is kept to a minimum to
prevent battery depletion.
Power consumption is kept to a minimum to
prevent battery depletion.
i If the camera is not used for approximately 30
seconds, the screen switches off temporarily
to reduce power consumption (Sleep mode).
to reduce power consumption (Sleep mode).
i Once the camera is in Sleep mode, if it is left
unused for a further 90 seconds, it is
automatically switched off.
automatically switched off.
i The charging time for the flash increases
slightly because the flash charging power is
reduced.
reduced.
Software needed for playing back movies, etc.
Launches the FinePixViewer
software when a camera is
connected.
software when a camera is
connected.
Software used to read PDF-format documents on a
personal computer. This software is needed to read the
User’s Guides for FinePixViewer.
personal computer. This software is needed to read the
User’s Guides for FinePixViewer.
Creates a FinePix CD Album.
Used for videoconferencing (Windows only)
Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
✽ Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with “DSC” selected as
the USB setting
(
with “DSC” selected as
the USB setting
(
➡P.96).
Connect the camera
with “PC CAM”
selected as the USB
setting (
with “PC CAM”
selected as the USB
setting (
➡P.99).
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
as USB Mass Storage (removable
disk drive, card reader).
Allows a digital camera to be
used as a PC Camera.
used as a PC Camera.
ImageMixer VCD
for FinePix
for FinePix
FinePixViewer
PictureHello
Acrobat Reader
R
QuickTime
USB PC Camera
Driver
Exif Launcher
USB Mass Storage
Driver
6 Software Installation
6.1 The Software Components