Lexmark Se 3455 Guia Do Utilizador
Envelope Feeder Option
262
Envelope
Feeder
Option
Installing Options
Installing the Envelope Feeder
Note:
Options compatible with the Optra S 1855 are labeled with
a colored circle. If the option is not labeled with a colored
circle, do not install it on an Optra S 1855. See the table on
page 1 for the location of the label.
a colored circle. If the option is not labeled with a colored
circle, do not install it on an Optra S 1855. See the table on
page 1 for the location of the label.
1
Turn the printer power Off (O).
2
Push the lower release latch on the front left side of the
printer to the right to release the door.
printer to the right to release the door.